The two most picked linings for rotating shaft security

Liners are utilized to safeguard the turning prop shafts of ships versus wear; stopping the wear of linings has actually always been a struggle. It's an obstacle to safeguard the linings' running surface in such a way that the life time will certainly be lengthened by many years. This blog site will certainly inform you much more regarding the two most-often picked liners for the security of turning shafts.

In this blog we differentiate between 2 sort of liners:

Chrome steel

Tungsten (HML).

Please note that cast iron and ceramic liners are still made use of, yet we do not provide them anymore. Ceramic linings are an outdated technique of liner defense; technological advancements have offered us with much better alternatives. Provided the truth that ceramic is really weak and also has a greater (2– 5%) porosity value, we like tungsten (HML) liners.

The liner of the forward seal is constantly shaft-centred. The liner of the aft seal is primarily hub-centred, however can additionally be shaft-centred.


Examine the recap below for a summary of the various kinds of liners. In short, the higher the surface solidity, the extra expensive the liner.

Chrome steel liner.

Life time: Tool.

Extra covering?: No.

Machinable?: Yes.

Cost: Tool.

Overall Expenses of Ownership: Tool.

Tungsten HML lining.

Lifetime: High.

Additional finish? Yes.

Machinable? No.

Rate: High.

Overall Prices of Ownership: Low.


Chrome steel linings contain steel with included chrome to raise the resistance to corrosion. They are made of duplex stainless steel and made use of for aft and onward seal boxes. The aft seal stops water ingress to the stern tube and oil leakage to the outside atmosphere. The forward seal avoids oil leakage from the stern tube to the engine space. For chrome steel liners it's possible to equipment the surface area. The machining allocations can be located in the lining information sheet (request gain access to), but they primarily have a permitted diameter decrease of 1 to 2 millimetres.


Tungsten HML liners are constructed from stainless-steel and carried out with a HML (Hard Steel Layer) finishing. The finish is a tungsten carbide boosted layer that is applied by High Speed Oxygen Fuel (HVOF) spraying production innovation. The thermal spray boosts the resistance against wear and rust. This HVOF layer is harder than the remainder of the product as well as of a various structure. A lining completely constructed out of difficult steel is really tough to make on a lathe, so rather the hard steel is included in the liner as an additional protective layer.

The threaded HVOF lining with HML does not need remachining, since the lip seals won't develop grooves in the liner as well as as a result drawing the shaft or eliminating the prop hub for this single objective is history. The HML can be applied on all our non-split chrome steel linings.

The lifetime of a liner might be expanded up to 20 years (in perfect problems) relying on the details operating problems of the Supreme ® seal. Customer experiences reveal that after 5– ten years of procedure, the HML layered linings reveal practically no wear. This means that the Overall Expenses of Ownership for HML linings will certainly drop. Please note that a tungsten HML liner can't be machined.


Drawing the shaft or removing the prop for a leaking seal is an expensive operation. With a split kind liner you stay clear of doing this. Split liners can be hub-centred or shaft-centred. Split liners are applicable to all our Supreme seals for propeller shafts. Obviously, the fully-split Supreme seal implementation likewise has– like all Supreme seals– divisible real estate components and lip seals. All our liners are machined in our own production center at our headquarters in Alblasserdam.


Most vessels utilize anodes to shield the submerged part of the ship. If you desire improved liner protection versus deterioration, anode blocks are an essential. The anode blocks will certainly sacrifice themselves and also safeguard the lining from deterioration.

Leave a Reply

Your email address will not be published. Required fields are marked *